Ontrack Enterprises
Podanur, Coimbatore, Tamil Nadu
GST No. 33AVJPM1227F1ZX
TrustSEAL Verified
Call 0794254321683% Response Rate
SEND EMAIL
Easyburn Sanitary Napkin Destroyer Machines is used for instant disposal of used napkins in a very scientific and hygienic way. It is specially designed to destroy up to 30 napkins at a time. It is the best solution for destroying sanitary napkin and converting it to sterile ash. . The Unit is Prepared with epoxy coated sheet metal and SS (Stainless Steel) for Good Look and to avoid Corrosion. It’s Automatic and Works on Domestic Electrical Supply. It is Idle for Sanitary Napkin Disposal & Small Clinical Waste. Our System for Sanitary Napkin Disposal is Eco- friendly, Helps to Avoid Drainage Line Chock-ups and having Very easy & Safe Operation
Product Details:
| Minimum Order Quantity | 1 Number |
| Incinerator Type | used napkin burning machine |
| Capacity | 10 kg/batch |
| Brand | easyburn |
| Type of Incinerator | used napkin burning machine |
| Power Source | non fuel |
| Waste Type | used napkin burning machine |
| Burning Ability | 5 kg/time |
| Average burn out time | 30 minutes |
| Material of Construction | Stainless Steel |
| Features | Not required any fuel |
| Automatic Grade | zero fuel manual napkin destroyer |
| Energy Consumption | Zero fuel |
| Product dimension | 1030 H*355 B *355 L in m m |
| Weight | 35 kg |
| Furnace chamber Temperature | 250-750 |
| Air Blower | aero dynamic |
| Burning Efficiency | 250 napkins per cycle |
EasyBurn Manual 516
Zero fuel incinerators are designed to burn both dry and wet waste into ash with in few minutes. Our O2 stimulated combustion technology helps complete combustion of waste under the high temperature generated inside the combustion chamber. It helps to dispose waste with minimum investment and absolutely no recurring cost. Very Compact design that it could be installed in any little space. It burns waste completely that the only by product would be ash, which could be used as fertilizer.
Nero Fuel Incinerator, no fuels required for incineration, unlike the other electrical incinerators.
Incinerator is insulated with high grade ceramic that help to maintain high temperature inside the combustion chamber.
Dual chamber combustion helps to prevent thermal radiation.
Very Economical way to dispose waste.
Low operational cost. Easy to operate & maintenance free.
Complete combustion of the waste and does not require any fuel or energy.
Compact Design: Compactness ensures minimum space utilization during erection.
We do supply water scrubber system as an accessory with the chimney that would help to emit odour and dust free air to the environment.
Zero Fuel Incinerator Customization: Customized to meet the client requirement, based on the region where it is installed, nature of waste and volume of waste required to be incinerated.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Number |
| Usage/Application | schools,hostels. |
| Type Of Incinerator | napkin Incinerator |
| Treatment | Electricals |
| Power Source | Electrical |
| Prescription/Non prescription | Non prescription |
| Waste Type | Sanitary Napkin |
| Brand | EasyVend |
| Capacity | 200/day |
| Warranty | 12 months |
| Burning Ability | 200/day |
| Average Burn Out Time | 20 min |
| Material | mild steel |
| Automation Grade | automatic |
| I Deal In | New Only |
| Energy Consumption | 1250W COIL |
| Product Dimension | 220L x 220B x 450 H mm |
| Weight | 15KG |
| Furnace Chamber Temperature | 350 |
| Minimum Order Quantity | 1 |
| Model | OTHEB541 |
| Dimension | 220L x 220B x 450 H mm |
| Process | Electrical |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 10 Napkins / Cycle,200 per day |
| Exhaust System | 2" emission outlet |
| Mounting Style | Wall Mount(WM) |
Features:
Ceramic insulation for external thermal protection.
Having an emission outlet outside the room for the fumes developed during the incineration.
Full proof insulation prevents heat transfer.
Product Details:
| Minimum Order Quantity | 10 Unit |
| Waste Type | Sanitary Napkin |
| Brand | EASYBURN |
| Warranty | 12 months |
| Dimension | 220L x 220B x 350H mm |
| Modal | OTHEB540 |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight top loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 10 Napkins / Cycle |
| Interval Timer | To control the running time,programmable according to the strength of users |
| Temperature Controller | NA |
| Temperature Sensor | NA |
| Exhaust System | Top mounted 2" Exhaust system |
| Mounting Style | Wall Mount(WM) |
| Power Supply | 230V +/- 10%,50 Hz,16 Amp,1.6Kw |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Packaging Size | 300*300*600 |
| Brand | EASYBURN |
| Manufacturer | Ontrack enterprise |
| Composition | Incinerators |
| Treatment | Incineration |
| Prescription/Non prescription | Non prescription |
| Operation Mode | Electric |
| Automation Grade | Automatic |
| Material | Mild Steel |
| Power Source | Electric |
| Surface Treatment | Color Coated |
| Phase | 1 |
EASYBURN, an incinerator which is used for instant disposal of used napkins, surgical mask and gloves in a very scientific and hygienic way. It is specially designed to destroy the used hygiene products in a user friendly and convenient way. It is the best solution for destroying all types of napkin, mask and gloves and converting it to sterile ash.
The Unit is Prepared with epoxy coated sheet metal and SS (Stainless Steel) for Good Look and to avoid Corrosion. It’s Automatic and Works on Domestic Electrical Supply. It is Idle for Sanitary Napkin Disposal mask, gloves & Small Clinical Waste. Our System for Disposal is Eco- friendly, Helps to Avoid Drainage Line Chock-ups, infections and has Very easy & Safe Operation
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Napkin incinerator |
| Type Of Incinerator | napkins |
| Power Source | Electrical |
| Waste Type | Sanitary Napkin |
| Capacity | 10pcs |
| Average Burn Out Time | 10-12mins |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Unit |
| Power Source | Electric |
| Voltage | 220 V |
| Material | Mild Steel |
| Mounting Option | Wall Mounted |
| Frequency | 50 Hz |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Operation Mode | Electric |
| Power Source | 230V +/- 10%, 50 Hz, 16 Amp, 2Kw |
| Mounting Type | Wall |
| Packing Type | Carton box |
| Warranty | 12 months |
| Is It Eco Friendly | Eco Friendly |
| Model | OTHEB522 |
| Exhaust system | Top mounted 2" Exhaust system |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
| Dimension | 370 x 250 x 250 mm |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 25 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
Product Details:
| Minimum Order Quantity | 1 No |
| Warranty | 12 months |
| Model | OTHEB512 |
| Dimension | 290 x 305 x 530 mm |
| Process | Automatic and Electrically operated |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 30 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
| Exhaust system | 3 inch emission outlet for easy combustion on the back side |
| Mounting Style | Wall Mount(WM) |
Features:
Ceramic insulation for external thermal protection.
Auto thermal cut off for safety of user.
Having an emission outlet outside the room for the fumes developed during the incineration.
Temperature and Timer display.
Tripper for Emergency Power shutdown.
Full proof insulation prevents heat transfer.
Product Details:
| Minimum Order Quantity | 25 Unit |
| Model | OTHEB514 |
| Dimension | 255 x 255 x 305 mm |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 15 Napkins / Cycle |
Product Details:
| Minimum Order Quantity | 50 Unit |
| Warranty | 12 months |
| Modal | OTHEB523 |
| Exhaust System | 3 inch emission outlet for easy combustion on the back side |
| Mounting Style | Floor Mount(FM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| Dimension | 400 x 400 x 750 mm |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 200 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Warranty | 12 months |
| Model | OTHEB511 |
| Exhaust System | 3 inch emission outlet for easy combustion on the back side |
| Mounting Style | Wall Mount(WM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| Dimension | 400 x 400 x 720 mm |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 50 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
Product Details:
| Minimum Order Quantity | 50 Unit |
| Warranty | 12 months |
| Model | OTHEB513 |
| Exhaust System | 3 inch emission outlet for easy combustion on the back side |
| Mounting Style | Floor Mount(FM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| Dimension | 290 x 305 x 530 mm |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 25 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
Additional Information:
Product Details:
| Minimum Order Quantity | 20 nos |
| Dimension | 620 x 580 x 900 mm |
| Modal | OTHEBTL601 |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 500 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
| Exhaust System | 3 inch emission outlet for easy combustion on the back side |
| Mounting Style | Floor Mount(FM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| warr | 12 months |
Product Details:
| Minimum Order Quantity | 100 Unit |
| Warranty | 6 months |
| Dimension | 255 x 255 x 305 mm |
| Modal | NA |
| Mounting Style | Wall Mount(WM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,2kw |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 15 Napkins / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Exhaust System | Top mounted Exhaust system |
Product Details:
| Minimum Order Quantity | 1 No |
| Operation Mode | Electric |
| Capacity | 5/cycle, 50/ day |
| Power Source | 230 v |
| Mounting Type | Wall |
| Voltage | 230 |
| Weight | 12 |
| Temperature | 350-500 |
| Packing Type | Box |
| Heater Power | 1200W |
| Warranty | 12 months |
| Warranty | 1 year |
| Model Number | OTHEB540 |
| Color | Blue |
| Material | MS and SS |
| Is It Eco Friendly | Eco Friendly |
| Usage | Clinical |
| Brand | EasyBurn |
| Electricity Consumption | 0.5 |
| Guarantee | 1year |
| Maintainance & Repairing Service | Yes |
| Mounting Option | Wall |
| Napkin Burning Capacity | 50/day |
| Napkin Storage Capacity | 5 / cycle, 50/ day |
| Dimension | 220 x 220 x 360 mm |
| Temperature Sensor | NA |
| Exhaust System | Top mounted 2" Exhaust system |
| Process | Automatic and Electrically operated |
| Inlet Door | Fully insulated Air tight top loading inlet door |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Power Supply | 230V +/- 10%, 50 Hz, 16 Amp, 1.6Kw |
| Loading Capacity | 5 Napkins / Cycle, 50/ day |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Temperature Controller | NA |
Description:
EASYBURN, Sanitary Napkin destroyer is used for instant disposal of used napkins in a very scientific and hygienic way. It is specially designed to destroy up to 30 napkins at a time. It is the best solution for destroying sanitary napkin and converting it to sterile ash.
The Unit is Prepared with epoxy coated sheet metal and SS (Stainless Steel) for Good Look and to avoid Corrosion. It’s Automatic and Works on Domestic Electrical Supply. It is Idle for Sanitary Napkin Disposal & Small Clinical Waste. Our System for Sanitary Napkin Disposal is Eco- friendly, Helps to Avoid Drainage Line Chock-ups and having Very easy & Safe Operation.
Benefits:
EASYBURN, Sanitary Napkin destroyer is used for instant disposal of used napkins in a very scientific and hygienic way. It is specially designed to destroy up to 5 napkins at a time.
It is the best solution for destroying sanitary napkin and converting it to sterile ash. The Unit is Prepared with epoxy coated sheet metal and SS (Stainless Steel) for Good Look and to avoid Corrosion. It’s Automatic and Works on Domestic Electrical Supply. It is Idle for Sanitary Napkin Disposal & Small Clinical Waste. Our System for Sanitary Napkin Disposal is Eco- friendly, Helps to Avoid Drainage Line Chock-ups and having Very easy & Safe Operation. EASYBURN is a convenient and safe method to destroy napkin It helps to maintain a pollution free environment.
Features:
Ceramic insulation for external thermal protection.
Auto thermal cut off for safety of user.
Having an emission outlet outside the room for the fumes developed during the incineration.
Tripper for Emergency Power shutdown.
Full proof insulation prevents heat transfer.
Product Details:
| Minimum Order Quantity | 25 Number |
| Capacity | 25 napkis per cycle |
| Warranty | 1 year |
| Machine Capacity | 250/day |
| Dimension | 280*250*600 |
| Machine Type | Automatic, Used napkin burner |
| Mounting Option | Wall Mounted |
| Average burn out time | 20 minutes |
| Power | 2000W |
| Voltage | 230 V |
| Power Source | Electrical |
| Condition | Second hand |
| Color | Blue |
EASYBURN, Sanitary Napkin destroyer is used for instant disposal of used napkins in a very scientific and hygienic way. It is specially designed to destroy napkins in a user friendly and convenient way. It is the best solution for destroying sanitary napkin and converting it to sterile ash.
The Unit is Prepared with epoxy coated sheet metal and SS (Stainless Steel) for Good Look and to avoid Corrosion. It’s Automatic and Works on Domestic Electrical Supply. It is Idle for Sanitary Napkin Disposal & Small Clinical Waste. Our System for Sanitary Napkin Disposal is Eco- friendly, Helps to Avoid Drainage Line Chock-ups and having Very easy & Safe Operation.
Product Details:
| Minimum Order Quantity | 50 No |
| Electricity Consumption | 0.5 |
| Warranty | 1year |
| Mounting Option | Wall Mounted |
| Napkin Storage Capacity | 25/cycle, 250/day. |
| Napkin Burning Capacity | 280/day |
| Power | 2000W |
| Voltage | 230 |
| Guarantee | Yes |
| Maintainance & Repairing Service | Yes |
| Construction | Constructed with epoxy coated sheet metal and SS (Stainless Steel) |
| Loading Capacity | 15 Kg / Cycle |
| Interval Timer | To control the running time, programmable according to the strength of users |
| Modal | OTHEB522 TC |
| Mounting Style | Wall Mount(WM) |
| Power Supply | 230V +/- 10%,50 Hz, 16 Amp,3kw |
| wa | 12 months |
| Process | Automatic,Electrical & Diesel Operated |
| Inlet Door | Fully insulated Air tight front loading inlet door |
| Temperature Controller | Automatic temperature cut off to prevent the overheating of the machine |
| Temperature Sensor | Help to detect the heat inside so the machine use electricity whenever required |
| Exhaust System | Top mounted 3" Exhaust system |
Burning machine with timer and temperature controller display
Additional Information: